$180.00
Premium Primer / Sealer designed for rubber surfacing systems. This dual-purpose aliphatic polyurethane coating can be used as a surface primer prior to installation or as a maintenance sealer for existing rubber surfaces. Formulated for excellent UV stability, weather resistance, and long-term outdoor performance on SBR and EPDM rubber systems.
• Dual-Purpose Primer & Sealer
• Superb UV & Weathering Resistance
• VOC Free
• Moisture Cure
• Compatible with SBR & EPDM
• 5 Gallon Pail
Premium Primer / Sealer designed to prepare surfaces prior to rubber surfacing installation while also serving as a maintenance coating for existing rubber surfaces.
Proper surface preparation is one of the most important steps in any rubber surfacing project. A clean, properly primed surface helps promote adhesion and creates the foundation for a successful installation. This moisture-cure polyurethane formula is designed to be used as a primer before installation or as a maintenance coating to help protect and refresh existing rubber surfaces.
Formulated with an aliphatic polyurethane system, this clear coating provides excellent UV stability and weather resistance for demanding outdoor environments. It can be applied by roller, brush, or spray and is suitable for use with SBR and EPDM rubber surfacing systems. Whether you’re preparing a surface for installation or maintaining an existing rubber surface, this versatile product helps support long-term performance and durability.
Features
• Dual-Purpose Primer & Maintenance Coating
• Superb UV & Weathering Resistance
• VOC Free Formula
• Moisture Cure Technology
Applications
• Surface Preparation Prior to Rubber Installation
• Existing Rubber Surface Maintenance
• Playgrounds
• Running Tracks
• Sport Facilities
• Recreational Areas
Container Size
• 5 Gallon Pail
Storage
• Store in a cool, dry location and protect from moisture until use.
Technical Documents
• Technical Data Sheet (TDS) – Coming Soon
• Safety Data Sheet (SDS) – Coming Soon
Before Application
• Surface must be completely clean and dry before application.
• Remove all loose rubber granules and debris.
• Do not apply to rubber surfaces that are deteriorating due to insufficient binder in the original installation.
Application Methods
• Can be applied by roller, brush, or spray.
• Apply an even coat across the surface.
• When rolling, use light pressure to help the material penetrate between rubber granules and minimize roller marks.
• When applying by spray, refer to the Safety Data Sheet (SDS) for safety and PPE requirements.
Use as a Primer
• May be used as a surface primer prior to rubber surfacing installation.
• Product may be thinned to the desired viscosity using an approved compatible solvent when used as a primer.
Use as a Maintenance Sealer
• May be applied to existing rubber surfaces as a maintenance coating.
• Helps refresh and protect rubber surfaces exposed to outdoor conditions.
Non-Skid Applications
• For non-skid coatings, apply sand, silica, or polyethylene to the coating during application.
Curing Information
• Curing occurs through exposure to atmospheric moisture.
• Higher temperatures and humidity will accelerate curing.
• Lower temperatures and low humidity will extend curing times.
• Under normal conditions, the product will form a hard film within 16–24 hours.
Storage & Handling
• Shelf life is 1 year in the original unopened container.
• Store in a cool, dry location and protect from moisture.
• Recommended air and substrate temperature: 60°F–100°F
Primer / Sealer